PLEASE REFER TO TORQUING AND ALIGNMENT BEFORE RIDING.
WARNING
1
2
1
2
3
4
NOTE: POSITION OF FRONT AND REAR BRAKE LEVER IS
DEPENDANT ON REGION. ENSURE YOU ARE AWARE WHICH BRAKE
IS CONTROLLED BY EACH LEVER BEFORE RIDING. SEE REGION
SPECIFIC SET UP AND CONTROL ON PAGE 10.
/22
6. Position the handlebars with the knurling centered inside the handlebar
clamp (1). Make sure that the control cables are not tangled or kinked (2).
7. Tighten the Stem Bolts in a criss cross pattern, ensuring the gap at
the front and rear of the stem remains even. FINAL ADJUSTMENT OF
THESE BOLTS OCCURS DURING ADJUSTMENT AND TORQUING
PG. 24.
To Next Page
Loading...