Ewellix THG - Ordering Key

47
11.0 Appendix
1)
Reduced safety factor
Options written in yellow are only available on demand. Contact Ewellix for more information on minimum quantities and additional costs.
Ordering key
Accessories
Type
Voltage
24 V DC 0
24VDCwithintegratedcurrentcut-o(onlyforA2andC2) 1
Load / Speed
4 000 N A2
3 000 N A1
2 000 N / 19 to 13 mm/s B1
2 000 N / 42 to 25 mm/s C2
1 000 N C1
Stroke [S]
300 mm 3
400 mm 4
500 mm 5
600 mm
1)
6
700 mm
1)
7
Cable / connecting plug
Straight, 1,0 m / jack plug 1
Straight, 2,3 m / jack plug 2
Coiled, 0,6 m / jack plug A
Straight, 1,0 m / DIN8 plug 3
Straight, 2,3 m / DIN8 plug 4
Coiled, 0,6 m / DIN8 plug B
Option
No option 0
1-Hall encoder, 8 pulses, cable with jack plug A
Cable feedthrough, 3x1,5 mm2, top +160 mm, bottom +800 mm C
Cable feedthrough, 1-Hall encoder, 8 pulses, cable with jack plug D
2-Hall encoder, cable with DIN8 plug F
T L T
1
– – 0 0 0
Designation Order number
Top mounting plate ZPL-290268 0125624
Bottom mounting plate ZPL-290265 0125623
Screw (4/plate) for mounting plate ZBE-510707 0125360