Need help?Do you have a question about the Ewellix THG and is the answer not in the manual?
Provides information for proper and safe installation, operation, maintenance, dismantling, and disposal.
Explains symbols and signal words used to indicate hazard severity and safety precautions.
Defines intended use and outlines owner/processor responsibilities for safety and compliance.
Specifies qualifications required for personnel operating or maintaining the device.
Details residual risks associated with using the pillar, including electrical and moving parts.
Describes integrated safety features and emergency stop requirements.
Explains procedures to prevent unintentional restart during maintenance.
Warns against unauthorized modifications and their potential consequences.
Warns about malfunctioning safety equipment and its critical importance.
Lists environmental and operational parameters like temperature and humidity.
Explains the information contained on the product's type label.
Describes the structure and components of THG and TLG pillars with a diagram.
Details the structure of TLT pillars with diagrams and dimensions.
Provides a general overview of the telescopic pillar's design and function.
Explains the operational mechanism of the telescopic pillar.
Illustrates connection diagrams for THG/TLG and TLT models to the control unit.
Lists available options such as impulse transmitters and potentiometers.
Identifies dangerous areas on the pillars for safety awareness.
Provides safety guidelines for transporting the pillar to prevent damage.
Details the process for checking shipments for completeness and damage.
Specifies the conditions for storing the pillar to maintain its integrity.
Covers electrical safety and safeguarding against restart during installation.
Provides instructions for physically attaching the pillar and connecting components.
Step-by-step guides for connecting jack and DIN-8 plugs to control units.
Covers safety aspects related to improper operation and moving parts.
Lists essential checks before operating the pillar.
Step-by-step procedure for stopping the pillar in an emergency.
Safety precautions for maintenance, including electrical hazards.
Outlines daily, monthly, and 6-monthly maintenance tasks.
Details components to inspect visually for damage after securing the device.
Steps to follow after maintenance, including checks and area cleanup.
Safety precautions for malfunctions, including incorrect repairs.
Details fault descriptions, causes, remedies, and authorized personnel.
Safety warnings regarding improper dismantling due to residual energy.
Step-by-step procedures for safely dismantling the pillar and disconnecting plugs.
Guidelines for disposing of the device and components according to regulations.
Lists publication numbers for technical data sheets of different models.
Presents detailed technical specifications for the THG pillar models.
Provides the key for ordering THG telescopic pillars and their configurations.
Presents detailed technical specifications for the TLG pillar models.
Provides the key for ordering TLG telescopic pillars and their configurations.
Presents detailed technical specifications for the TLT1 pillar models.
Provides the key for ordering TLT1 telescopic pillars and their configurations.
Presents detailed technical specifications for the TLT20 pillar.
Provides the key for ordering TLT20 telescopic pillars and their configurations.
General| Duty cycle | 10% |
|---|---|
| Voltage | 24 VDC |
| Protection class | IP54 |
| Noise level | <50 dB |
| Operating temperature | +40°C |
| Material | Aluminum |
To Next Page