EWM Tetrix 350 - Menu Options for Reset, Software Version, and Ignition Limit; Menu: Reset to Factory Settings

Design and function
Menus and sub-menus on the machine control
98
099-004854-EW501
19.02.2014
Display
Setting/selection
Reset (reset to factory settings)
• off = aus (factory setting)
• CFG = Reset the values in the machine configuration menu
• CPL = Complete reset of all values and settings
The reset is performed when leaving the menu (EXIT).
Software version query (example)
07= System bus ID
0340= Version number
System bus ID and version number are separated by a dot.
Only qualified service personnel may change the parameters!
Ignition pulse limit
Setting 0 ms–15 ms (increments of 1 ms)