Chapter 5
eWON Flexy IP Address and Access to the Web
Configuration
Start the eBuddy utility on your PC
In the home page, select Set IP Address
Fill out the Serial Number of your Flexy or click on Browse and select it. The Serial Number of
the Flexy is on its label, see § 3.1 Base Unit Label.
Click Next
Enter new LAN IP address and Subnet
Mask. Click Next
Wait until the address is updated and the device rebooted.
Click Finish.
Page 29 / 40 eWON Flexy - Base Units | IG 014
To Next Page
Loading...
Need help?
General
