Exacq exacqVision - Alarm Output - TTL

exacqVision User Manual
1/24/2011
Alarm Output - TTL
exacqVision has 15 TTL Alarm Outputs that can
example, the exacqVision is integrated with a building automation system through a 0
Digital Input Module
for equipment or alarm status monitoring.
(1)
Connect any of the 15 TTL Alarm Outputs to the 0
(2)
Connect ground to ground
You can set the “Normal State” of the Alarm Output to either High (5 VDC) or Low
(0 VDC) on the Alarm Output setup screen on p
Page 23
exacqVision has 15 TTL Alarm Outputs that can
be triggered by
a variety external events.
example, the exacqVision is integrated with a building automation system through a 0
for equipment or alarm status monitoring.
Connect any of the 15 TTL Alarm Outputs to the 0
-
5 VDC input
Connect ground to ground
You can set the “Normal State” of the Alarm Output to either High (5 VDC) or Low
(0 VDC) on the Alarm Output setup screen on p
age 150.
a variety external events.
In this
example, the exacqVision is integrated with a building automation system through a 0
-5 VDC
5 VDC input
You can set the “Normal State” of the Alarm Output to either High (5 VDC) or Low