To Next PageTo Next Page
Need help?Do you have a question about the Exacq exacqVision E Series and is the answer not in the manual?
Details front and rear panel components for E-series encoders.
Explains how to connect external alarm devices.
Finding and modifying IP addresses and network settings.
Restoring default password and security considerations.
Adding the encoder to the exacqVision software.
Confirming the encoder is detected and transmitting video.
Process for installing necessary browser components for configuration.
Navigating the main interface for live video monitoring.
Operating PTZ functions and configuring video parameters.
Configuring local operational parameters like stream type and recording.
Setting the device's time and synchronization methods.
Setting up IP, subnet, gateway, and DNS.
Configuring HTTPS, IP filtering, and 802.1x.
Managing ports, PPPoE, QoS, SOCKS, NAT/UPnP, and Bonjour.
Customizing onscreen display of camera name, date, and time.
Adjusting video stream parameters like resolution and encoding.
Setting up motion detection zones and sensitivity.
Configuring video loss, privacy masking, and tampering detection.
Setting serial communication parameters for RS-232.
Configuring RS-485 for PTZ camera control.
Setting up external devices to trigger alarms.
Configuring the encoder to trigger external devices.
Setting actions for various system error conditions and alarms.
Adding, modifying, and deleting user accounts and permissions.
Searching and viewing system event logs.
Accessing detailed hardware and firmware information.
Performing reboot, restore, import/export, and upgrade tasks.
General| Category | Media Converter |
|---|---|
| Fiber Ports | 2 SFP |
| Power Consumption | 10W |
| Operating Temperature | -40°C to 75°C (-40°F to 167°F) |
| Humidity | 5% to 95% (non-condensing) |
