Exacq exacqVision E Series - Motion Detection Setup

www.exacq.com
+1.317.845.5710
+44.1438.310163
USA (Corporate Headquarters)
Europe/Middle East/Asia
45
Configuring Motion Detection
Motion detection can trigger an alarm and record video when motion is observed in the camera view. To configure
motion detection, complete the following steps:
Set the Motion Detection Area
1. From the Remote Configuration menu, select Camera Settings and then Motion Detection to open the Motion
Detection settings interface.
2. Select the Channel from the drop-down list.
3. Select the Enable Motion Detection checkbox.
4. Click the Draw Area button.
1
2
2
2
3
2
4
2