4
INTRODUCTION
THANK YOU FOR CHOOSING AN EXCEL BALER.
You have selected a precision-engineered product designed with advanced features for modern recycling center baling. The
power of intelligent engineering and use of the highest quality components available guarantee many years of maximum
performance and reliable service from your baler.
To maintain quality performance, it is important that all personnel involved in the installation, operation, and maintenance of the
equipment, carefully read and follow the instructions in this guide until completely familiar with the proper safe operating
procedures. This manual is arranged in the order that we anticipate you will use it to operate the equipment.
This manual does not represent an inclusive list of Safety Precautions. It is suggested that owner/operators read the most current
publication of American National Standard Safety Requirement No. Z245.5, entitled "Safety Requirement for Baling Equipment."
Copies may be purchased from the AMERICAN NATIONAL STANDARDS INSTITUTE, 11 West 42nd ST, New York, NY
10036, phone (212)-642-4900.
It is also suggested that owner/operators read the most current publication of "Control of Hazardous Energy (Lock Out/Tag Out)."
OSHA publication 3120. Available at regional offices of US Department of Labor, Occupational Safety and Health
Administration.
Elimination of the hazards listed in this manual does not guarantee that the equipment will meet or exceed all standards or
regulations, or will be completely safe to all personnel. The equipment should be inspected before use to assure adequacy in
safety for the function for which it will be used.
To Next Page
Loading...