6
SHORT STROKE CYCLE
This feature enables the ram to cycle with shorter (8”)chamber penetration. The short stroke cycle produces approximately 17
seconds cycle time, allowing material such as corrugated cardboard to be baled at higher production rates.
INTEGRATED CONVEYOR CONTROLS W/CONVEYOR MOTOR STARTER (optional)
All conveyor controls are conveniently located on the control panel with the baler controls. Also, no separate electrical disconnect
is required for the conveyor. Conveyor power is interlocked with the baler power.
ADVANCED CONTROL PANEL
In addition to normal baler operation controls, advanced controls include an Upper and Lower Photo Eye selector to start and stop
the conveyor, and a Conveyor Override switch, which allows the operator to run the conveyor at any time.
To Next Page
Loading...