Excell FJ5 - Restore Default Setting

EXCELL PRECISION CO., LTD.
45046
23
ZSME300000343
2-2-2 Restore Default Setting
 If parameter is set as “ ”, the weight calibration value of crane will
be restored to the default setting value.
Use MODE or HOLD key to enter a parameter
Default setting =
 Return to upper level
 Restore to the default value of weight
calibration.
Press TARE key
Press TARE key
MODE  Upward digit selecting (0-9)
HOLD  Downward digit selecting (9-0)
ZERO  No function
TARE  Confirm