EasyManuals Logo

EXFO FTB-1v2 User Manual

EXFO FTB-1v2
497 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Regulatory Information
x FTB-1v2 and FTB-1v2 Pro
European Community Wireless Compliance
Related Information
The information about the Bluetooth
®
and Wi-Fi frequency bands is as
follows:
 Bluetooth
®
: Between the frequencies 2400.0 MHz - 2483.5 MHz.
The output power is 4.0 dBm typical.
 Wi-Fi: Between the frequencies 2400.0 MHz - 2483.5 MHz.
The maximum output power is 16.0 dBm.
 Wi-Fi: Between the frequencies 5150.0 MHz - 5825.0 MHz.
The maximum output power is 12.0 dBm.
This device is a 2.4 GHz and 5 GHz wideband transmission system
(transceiver), intended for use in all EU member states and EFTA countries,
except in France and Italy where restrictive use applies.
In Italy, the end-user should apply for a license at the national spectrum
authorities in order to obtain authorization to use the device for setting up
outdoor radio links and/or for supplying access to telecommunications
and/or network services.
This device may not be used for setting up radio links in France, and in
some areas the RF output power may be limited to 10 mW EIRP in the
frequency range of 2454 - 2483.5 MHz. For detailed information, the
end-user should contact the national spectrum authority in France.
In the European Union, the low band 5.15 - 5.35 GHz is for indoor use only.

Table of Contents

Other manuals for EXFO FTB-1v2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EXFO FTB-1v2 and is the answer not in the manual?

EXFO FTB-1v2 Specifications

General IconGeneral
BrandEXFO
ModelFTB-1v2
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals