Accessing Your Unit Remotely
196 FTB-1v2 and FTB-1v2 Pro
Working With VNC
Working With VNC
The control of your unit with VNC requires the UltraVNC Server (already
installed on your unit) and a VNC viewer (that you must install on your
computer).
To be able to connect to the unit using VNC, you must:
Know the IP address of the unit and provide it in the connection
settings on the computer.
Know the password (same for all users by default).
This section provides you with the basic information to control your unit
with VNC.
To Next Page
Loading...
