EXFO FTB-1v2 - Linking Units with the Ethernet Port; Linking Units Using a Serial Port

Preparing for Automation
FTB-1v2 and FTB-1v2 Pro 217
Linking Units with the Ethernet Port
Linking Units with the Ethernet Port
Your unit is equipped with Ethernet ports (10/100/1000) to send and receive
data. Refer to the Windows documentation for information about Ethernet
port settings and possibilities.
Linking Units Using a Serial Port
Your unit is not equipped with a serial (RS-232) port, but you can connect a
USB to RS-232 adapter (sold by EXFO) to your one of the USB ports of your
unit if you wish to send and receive data via RS-232. Refer to the Microsoft
Windows documentation for information about serial port settings and
possibilities.
Ethernet (RJ-45) port