Setting Up Your FTB-1v2 and FTB-1v2 Pro
72 FTB-1v2 and FTB-1v2 Pro
Adjusting Speaker and Microphone Volume
Adjusting Speaker and Microphone Volume
Your unit is equipped with a built-in speaker, but you can also connect a
headset to your unit.
To fit your work environment, you may adjust the volume of the speaker,
the headphones, or the microphone. Values are kept in memory even
when you turn the unit off.
To adjust the speaker (or headphones) volume:
1. If necessary, ensure that the headset is connected to the audio port
located on the top panel of the unit.
2. From the main window, tap the System Settings button.
Headset/microphone port
(for 3.5 mm connector)
To Next Page
Loading...
