Maintenance
276 FTB-1v2 and FTB-1v2 Pro
Recharging the Batteries
To recharge the batteries:
Connect the unit to a power outlet using the AC/DC power adapter (or the
car outlet adapter, when offered). The charge cycle will start and end
automatically.
IMPORTANT
If the unit will not be used for more than two weeks, ensure
that the batteries are charged at around 50 % of their capacity,
and then turn the unit off (shutdown). For optimum battery
performance, follow the recommendations below about battery
storage.
If you need to store the batteries for an extended period of
time, place them in a cool dry place, and ensure that they are
charged at around 50 % of their capacity. Every three months
during the storage period, verify the battery levels. Recharge
the batteries when necessary, so that their charge levels
remains around 50 % of the total capacity. This will ensure that
you get the optimum performance out of the batteries.
To Next Page
Loading...
