Getting Started with Your Unit
FTB-1v2 and FTB-1v2 Pro 61
Activating Software Options
5. Tap the Platform Options tab or the Module Options tab, depending
on the type of options that you want to activate.
6. Use the Browse button to locate the key file that you want to use.
7. Tap Activate.
The option indicator will turn into a green check mark to confirm that
the option is now active.
Note: You can see the supported options in the Options list.
8. Tap OK to close the confirmation message, and then Close to exit.
Note: At this point, if you have used a USB key to copy your key file, you can
remove it as it is not required to use your new options.
To Next Page
Loading...
