Exmark STARIS E Series - Mower Adjustments; Deck Leveling Procedure

Maintenance
Adjustments
Note:DisengagePTO,shutoffengine,waitfor
allmovingpartstostop,engageparkingbrake,and
removekeybeforeservicing,cleaning,ormakingany
adjustmentstotheunit.
DeckLeveling
Note:Smalladjustmentscanbeaccomplishedby
increasingthetirepressureinthetireonthelowside.
1.Parkthemachineonalevelsurfaceanddisengage
thebladecontrolswitch.
2.Stopengine,waitforallmovingpartstostop,and
removekey.Engageparkingbrake.
3.Checktheairpressureinthedrivetires.Ifneeded,
adjusttotherecommendedination;referto
CheckingtheTirePressureinDriveSystem
Maintenancesection.
4.Settheheightofcutpinstothe3inch(7.6cm)
position.
5.Raisethedischargedeector.
6.Carefullyrotatethebladesfronttorear.Measure
fromthetipofthefrontbladetothelevelsurface
(Figure26).Thebladesshouldmeasure3inches
(7.6cm)±1/8inch(.3cm).
Note:Inmostconditions,thebacktipsshould
beadjusted3/16–1/4inch(4.6–6.4mm)higher
thanthefront.
g014790
Figure26
1.31/4inches(8.3cm)4.3inches(7.6cm)
2.Backbladetip
5.Levelsurface
3.Frontbladetip
7.Usetheneadjustmentsonthereardecklift
pinstoadjusttheheightoftherearbladetips.
Loosenthejamnutontherearpin.Finetunethe
rearbladetipbyrotatingthepin.Toincreasethe
height,turnthepinclockwise;todecrease,turn
counterclockwise(seeFigure27).
g271523
Figure27
1.Jamnut
8.Tightenthejamnut.
9.Lowerthedischargedeector.
PumpDriveBeltTension
Self-tensioning-Noadjustmentnecessary.
39