Room Scheduling System • Room Agent Installation and Configuration 44
3
Sensor Output Type radio button (see figure 45 on the previous page) — Select one
of these radio buttons to denote how the occupancy sensor is wired to the TLS 520M,
TLS 725M, or TLS 1025M scheduling panel or TLP Pro 520M touchpanel:
• Control
•
Relay
- NC (Normally Closed)
•
Relay
- NO (Normally Open)
Preview pane
The preview pane (see figure 46,
1
) shows the effects of changes that you make using the
controls within the panel design pane.
NOTE: The preview pane contains hardcoded, sample, entries. The layout and
appearance of this pane change to reflect your changes in the design pane, but,
other than the date and time, the content, such as “Main Conference Room”, do not
change.
Figure 46. Preview Pane and Drop-down list
2
Preview: drop-down list — The Preview:
drop-down list lets you select among various
display possibilities so that you can further refine the
appearance of panels in all of these circumstances.
Templates pane
Templates, such as the default DefaultTLPTemplate, which is the default that is installed
as part of the Room Agent installation, allow you to create a number of customized panel
appearances. Each panel in a system can have its own template, assigned on the Panel
Configuration window (see figure 21,
7
on page 22 for an example). Select the
templates on the Templates pane (see figure 47).
333333333
444444444
2222222222
Figure 47. Templates Pane and Drop-down list
To Next Page
Loading...