SpeedSwitch Technology — Provides exceptional switching speed for HDCP-encrypted
content.
SD Pro processing provides deinterlacing of standard definition video —
Deinterlaces 480i and 576i signals for compatibility with HDMI and DVI-equipped displays,
without the need for additional scalers.
EDID Minder — Automatically manages EDID communication between connected devices,
ensuring that all sources power up properly and reliably output content for display.
Key Minder — Continuously verifies HDCP compliance for quick, reliable switching.
Authenticates and maintains continuous HDCP encryption between input and output
devices to ensure quick and reliable switching in professional AV environments, while
enabling simultaneous distribution of a single source signal to one or more displays.
Modular, field-upgradeable and hot-swappable design — The XTP II CrossPoint
provides substantial flexibility, expandability, and affordability by allowing users to select the
configuration required for a system. Additional input and output boards may be added at
any time for quick and easy upgradeability or expansion. Hot-swappable components allow
the user to replace an I/O board at any time without the need to power down the switcher.
This is especially useful for mission-critical applications that require continuous system
operation.
Audio breakaway — Provides the capability to separate an embedded audio signal from
its corresponding video signal within the matrix switcher, allowing the audio and video
signals from one source to be switched to different destinations.
Ethernet extension — Centralized 10/100 Ethernet communication can be implemented
via an Ethernet pass-through port to reduce the amount of independent network drops
required within a system.
Digital output boards provide +5 VDC, 250 mA power on each output for powering
external peripheral devices — Power provided via the digital output of a board eliminates
the need of a separate power supply for the connected peripheral device.
Automatic cable equalization for each digital input to 100 feet (30 m) when used
with Extron HDMI or DVI Pro cables — Cable input equalization optimizes signal
performance for all incoming signals, ensuring pristine image quality is delivered throughout
an XTP II CrossPoint System.
Automatic output reclocking — Reshapes and restores timing of digital video signals
at each output, eliminating high frequency jitter to ensure reliable transmission over long
cables.
Audio input gain and attenuation — Allows the level of gain or attenuation to be set,
eliminating noticeable volume differences when switching between sources.
Audio output volume adjustment and muting — Audio output can be set dynamically
for each channel through the front panel or serial control eliminating the need for audio
preamplifiers in many system designs.
Ethernet monitoring and control — Engineered to meet the needs of professional AV
environments, Ethernet control provides proactive monitoring and system management over
a LAN, WAN, or the Internet, using standard TCP/IP protocols. Ethernet control provides for
remote selection of input and output ties, adjustment and control of audio input and output
levels, and advanced system diagnostics.
Tri-color, backlit buttons — Buttons can be custom labeled for easy identification. The
buttons illuminate red, green, or amber, depending on function, for ease of use in low-light
environments.
QuickSwitch Front Panel Controller (QS-FPC) — Provides a discrete button for each
input and output, allowing for simple, intuitive operation.
XTP II CrossPoint 1600, 3200, and 6400 Switchers • Introduction 8
To Next Page
Loading...
Need help?
General
