version 4.7.2 – July 10th, 2022 Firmware version V2.1.7 and higher
EXXFIRE Installation and Service Manual 113
12 DECOMMISSIONING
Decommissioning of the system without it being used.
• De install the system and put it in its original packaging and return it to the Distributor of
your catchment area/country/region
• Use the ppipe fitting disconnecting tool from the mounting kit to disassemble the pipe
connections:
1. Place the tool arms against the sides of a coupling.
2. Squeeze the tool and disassemble. The arms will move a plastic ring inward that
releases the fitting.
• Call the distributor of the applicable country (see a list at www.exxfire.com).
• The distributor will organize the collection of the used generators in the respective
catchment area/region/country and takes care of the chemical waste disposal process on
behalf of EXXFIRE.
To Next Page
Loading...