EXXFIRE 750CNF - List with Optional and Additional Functions

version 4.7.2 – July 10th, 2022 Firmware version V2.1.7 and higher
EXXFIRE Installation and Service Manual 24
List with Optional and Additional functions
Requirement
Description
O*
A*
Manual
Section
5.4.1.b-a and
5.4.6.a
Delay of extinction signal
v
5.2
5.4.1.b-e and
5.4.6.e
Transmission of control signal to equipment forming
part of the system: RS485 bus for connected
systems (Master-Slave configuration)
v
0
5.4.1.b-f and
5.4.6.f
Transmission of signals to equipment located
outside the extinguishing system (relay outputs for
ventilation stop, energy shutdown, indication of pre-
alarm)
v
2.6
n.a.
Door Switch input
v
7.5
SD card for data logging
v
7.15
DIP switches for configuration settings
v
5
Pre-alarm relay output
v
4.5.4
Connection of multiple systems
v
4.5.3 and 0
Gas-released indicator
v
7.1
Pre-alarm1 and pre-alarm 2 indicators
v
7.1
Indicators for Master and Slave systems
v
7.1
Commissioning of flow monitoring function
v
6.1
Service intervals
v
7.13
* Optional
** Additional