EasyManua.ls Logo

F.u.n.k.e. FSG 90 - Appendix A: Technical Summary; General Technical Specifications

F.u.n.k.e. FSG 90
81 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FSG 90 System
Appendix A
58 FAV_D10024 December 2014
Appendix A, Technical Summary
A.1 General
Type:
Frequency Range:
Number of Channels:
Number of Channel Memories:
Nominal Supply Voltage:
Nominal TX carrier output:
FSG 90, A/N F10185
118.000 MHz to 136.975 MHz with 25 kHz spacing and
118.000 MHz to 136.975 MHz with 8.33/25 kHz spacing
25 kHz spacing: 760
8.33/25 kHz spacing: 2,278, totally 3,038 Channels
99 for Channel names with 8.33/25 kHz spacing. Additional
99 channel memories for frequencies with 25 kHz spacing.
13.8 Vdc
≥ 6 Watt
Type:
Frequency Range:
Number of Channels:
Number of Channel Memories:
Nominal Supply Voltage:
Nominal TX carrier output:
FSG 90-H1, A/N F10302
118.000 MHz to 136.975 MHz with 25 kHz spacing and
118.000 MHz to 136.975 MHz with 8.33/25 kHz spacing
25 kHz spacing: 760
8.33/25 kHz spacing: 2,278, totally 3,038 Channels
99 for Channel names with 8.33/25 kHz spacing. Additional
99 channel memories for frequencies with 25 kHz spacing.
14.0 Vdc
≥ 10 Watt
Supply Voltage Range
11.0 - 16.5 Vdc, continuous
Emergency Operation (below 11 Vdc)
Good communication from 10 Vdc on
Automatic Turn-Off
Approx. 8.5 … 9.5 Vdc Supply
Automatic Turn-On (reset)
Approx. 9.5 … 10 Vdc Supply
Input Current at 13.8 Vdc:
Standby (Power Saving Mode)
Additionally Squelch, Intercom + AF Ext.
Receive Mode (70% AM voice)
Transmit Mode (carrier / 70% AM voice)
Display Lighting
FSG 90:
≤ 85 mA (no volume, no AF External, no Intercom)
add 30 mA w/out AF volume, add 250 mA with max volume
≤ 1 A (into 2 Ohm speaker)
≤ 2.5 A / ≤ 3.0 A
≤ 30 mA additionally
Input Current at 14.0 Vdc:
Standby (Power Saving Mode)
Additionally Squelch, Intercom + AF Ext.
Receive Mode (70% AM voice)
Transmit Mode (carrier / 70% AM voice)
Display Lighting
FSG 90-H1:
≤ 85 mA (no volume, no AF External, no Intercom)
add 30 mA w/out AF volume, add 250 mA with max volume
≤ 1 Amp (into 2 Ohm speaker)
≤ 3.5 A / ≤ 4.5 A
30 mA additionally
DC Supply indicator
3 segments visible: ≥ 12.7 Vdc Battery full
2 segments visible: ≥ 12.0 Vdc Battery ca. ½ capacity
1 segment visible: ≥ 11.0 Vdc Battery nearly
discharged
3 flashing segments: 11 V … 10 Vdc Emergency operation

Table of Contents

Related product manuals