Fagor ACSD series - ACSD Drives Dimensions

ACSD-26/80 Digital Brushless AC Servo Drive system - Ref.1609
Dimensions
Technical data
F. 14 ACSD drives. Dimensions.
· 220 V · L series · 400 V · H series
05 10 20 30 04 08 16
Rated output current (A) 2.5 5 10 15 2 4 8
Peak current (0.5 s) (A) 5 10 20 30 4 8 16
Power supply
3 AC 220/240 V ± 10 %
50/60 Hz ± 10 %
3 AC 400/460 V ± 10 %
50/60 Hz ± 10 %
Consumption (A) 5.6 11.1 22.2 33.3 4.4 8.9 16.7
Consumption (A)
On single-phase models*
9.5 18.5
-- - - -
Over-voltage protection 430 V DC 803 V DC
Frequency Lower than 600 Hz
Internal Ballast () 112 56 28 18 132 132 66
Power of the internal Ballast 150 W
Ballast trigger 416 V DC 780 V DC
Thermal protection of the
heatsink
90°C/194°F
Operating temperature 5°C/45°C (41°F/113°F)
Storage temperature - 20°C/60°C (-4°F/140°F)
Protection degree IP 20
Dimensions 67 x 280 x 245 mm (2.48 x 11.8 x 9.05 in)
Mass 3.85 kg (8.5 lb)
IP 20 means that it is protected against objects of a diameter larger than 12.5 mm, but
not against water splashes. Put the unit inside an electrical cabinet.
INFORMATION. * Modules ACSD-05L and ACSD-10L (220 V AC) may be
supplied with a single-phase power voltage. See GP16.
67 mm (2.63") 245 mm (9.64")
280 mm (11.02") 330 mm (12.99")
300 mm (11.8")
6 mm (0.23")
11 mm (0.43")
ACSD
i