Fanvil i21 - Service Port

21
Field Name
LLDP Setup Description
Open LLDP Open the phone LLDP Message function
Open Learning
Function
Open phone learning LLDP function ， After the
opening ， phone will automatically learn QoS in
switch ，VLAN ID，802.1p,etc.configuration value.If
different，phone will Automatically updated to the value
in switch, synchronization with switches.
Data sending
interval
The interval of phone sending data ， the unit is
second.Default it is 60 seconds.
QOS Setup
Open DiffServ Configurate whether open DiffServ
Signal Dscp Configurate the value of Signal Dscp
Voice Dscp Configurate the value of Voice Dscp
WAN VLAN Setup
Open WAN Port
VLAN
Open the VLAN of WAN port
WAN Port VLAN ID
Configurate ID value of VLAN，range is 0-4095
Signal 802.1P Priority
Configurate the value of Signal 802.1P，range is 0-7
Voice 802.1P Priority
Configurate the value of Voice 802.1P，the range is
0-7
LAN VLAN Setup
LAN Port Vlan
Open/forbid Port Vlan
Same as WAN port ID value
Close:Disable Port Vlan
Open：after open it then input different ID value from
WAN port
LAN Port VLAN ID
Setup ID value of VLAN，range is 0-4095
4.3.2.3. Service Port
Through this page can set Telnet ,HTTP,RTP port.