Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 10
Inspections
Pre-Delivery
After the machine has been completely assembled, inspect it to be sure it is in good running order
before delivering it to the customer. Ensure each item is found satisfactory or proper adjustment
to the item(s) is made.
The following checklist is a reminder of points to inspect. It is neither an exclusive nor an
exhaustive list of points to inspect. See the Warranty Inspection Report for a formal list.
o SMV emblem is installed, protective shipping tape is removed from reflectors, and lights
are installed.
o All grease fittings are lubricated (see LUBRICATION and MAINTENANCE section in this
Manual.)
o Inspect to be sure all nuts are tightened to proper torque and all cotter pins are spread.
o The tires are properly inflated (see SPECIFICATIONS).
o Wheel bolts are tightened to their specified torque(s).
o Fertilizer row units are properly adjusted.
o Warning lights are properly installed and operational.
o All customer-ordered attachments are installed or are available for delivery.
o Any parts scratched in shipment are touched up with paint.
o All shipping decals are removed.
o Transport pins are inserted in the transport holes.
This machine has been thoroughly checked and to the best of my knowledge is ready for delivery
to the customer.
Signed: _________________________
Date: _________________________
To Next Page
Loading...
Need help?
General