SAFETY Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 17
SAFETY
The most important safety device on this
equipment is a safe Operator. It is the
Operator’s responsibility to read and
understand and follow all safety and
operating instructions in this Manual.
As the Operator, you are responsible for the
safe operation and maintenance of this
equipment. You must ensure that you and
anyone else who is going to operate,
maintain or work around the machine is
familiar with the operating and maintenance
procedures and related safety information
contained in this Manual.
You are the key to safety. Good safety
practices protect you and the people around
you. Be certain that everyone operating this
equipment is familiar with the recommended
operating and maintenance procedures and
follows all safety precautions. Do not risk
injury or death by ignoring good safety
practices.
Safety Alert Symbols and Signal
Words
This is a Safety Alert Symbol. When you see
this symbol on your machine or in this
Manual, be alert to the potential for personal
injury.
Follow recommended precautions and safe
operating practices.
Understand Signal Words
Throughout this Manual, the terms
CAUTION, WARNING, and DANGER are
used along with the Safety Alert Symbol to
indicate the degree of personal safety
hazard. The term IMPORTANT is used to
indicate that failure to observe the hazard
can cause damage to the equipment.
DANGER identifies the most serious
hazards. DANGER or WARNING safety
signs are located near specific hazards.
General precautions are listed on CAUTION
safety signs. CAUTION also calls attention to
safety messages in this Manual.
Follow Safety Instructions
Carefully read all safety messages in this
Manual and on your machine’s safety signs.
Keep safety signs in good condition.
Replace missing or damaged safety signs.
Be sure new equipment components and
repair parts include the current safety signs.
Replacement safety signs are available from
your Fast Ag Solutions dealer. There can be
additional safety information contained on
parts and components sourced from
suppliers that is not reproduced in this
Operator's Manual.
Learn how to operate the machine and how
to use controls properly. Do not let anyone
operate without instruction.
Keep your machine in proper working
condition. Unauthorized modifications to the
machine may impair the function and/or
safety and affect machine life.
If you do not understand any part of this
Manual and need assistance, contact your
Fast Ag Solutions dealer.
To Next Page
Loading...
Need help?
General