Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 14
Foreword to the Owner
READ THIS MANUAL carefully to learn how to operate and service your machine correctly. Failure
to do so could result in personal injury or equipment damage. This Manual and safety signs on
your machine may also be available in other languages.
THIS MANUAL SHOULD BE CONSIDERED a permanent part of your machine and should
remain with the machine when you sell it.
MEASUREMENTS in this Manual are given in both metric and customary U.S. unit equivalents.
Use only correct replacement parts and fasteners. Metric and inch fasteners may require a
specific metric or inch wrench.
RIGHT-HAND AND LEFT-HAND sides are determined by facing in direction that the implement
will travel when going forward.
WRITE PRODUCT IDENTIFICATION NUMBERS (P.I.N.) in the Specification section and in the
Owner Register. Accurately record all numbers to help in tracing your machine should it be stolen.
Your dealer also needs these numbers when you order parts. File identification numbers in a safe
place off-machine.
BEFORE DELIVERING THIS MACHINE, your dealer performed a pre-delivery inspection.
THIS LIQUID FERTILIZER APPLICATOR IS DESIGNED SOLELY for use in customary
agricultural or similar operations for the purpose of strip freshening row crops (“Intended Use”).
Use in any other way is considered as contrary to the Intended Use. The manufacturer accepts
To Next Page
Loading...
Need help?
General