Fast A10 User Manual

SPECIFICATIONS
SPECIFICATIONS Liquid Fertilizer Applicator A10 / A13 / A18 / A24 Page 32
SPECIFICATIONS
Tractor Power, Size Recommendation
Use the machine with a tractor providing drawbar power in the following ranges:
Table 1: Recommendation with 40' toolbar and 25 coulters
Tank Size, L
(gal.)
Machine size, m
(ft)
Tractor Power, kW
(HP)
Min. Tractor Weight, kg
(lbs.)
3975 (1050)
12.2 (40)
136-155 (183-207)
6,849 (15,100)
5110 (1350)
12.2 (40)
138-157 (185-210)
7,893 (17,400)
6814 (1800)
12.2 (40)
142-161 (191-216)
10,115 (22,300)
9085 (2400)
12.2 (40)
146-165 (196-222)
12,247 (27,000)
Table 2: Recommendation with 30' toolbar and 13 coulters
Tank Size, L
(gal.)
Machine size, m
(ft)
Tractor Power, kW
(HP)
Min. Tractor Weight, kg
(lbs.)
3975 (1050)
9.1 (30)
76-86 (102-116)
6,622 (14,600)
5110 (1350)
9.1 (30)
78-88 (105-119)
7,666 (16,900)
6814 (1800)
9.1 (30)
82-93 (110-125)
9,888 (21,800)
9085 (2400)
9.1 (30)
86-97 (115-130)
11,975 (26,400)
IMPORTANT: Verify the main tank is empty before transporting on road.
Hydraulic System Requirements
A tractor hydraulic system with ISO hydraulic couplers is required.
Three tractor Selective Control Valves (SCV) at the listed flowrates and pressure are required for
following:
Circuit
SCV Function
Flowrate
Pressure
1
Main Lift Cylinders and Main Wing
Down Pressure (Kick) Cylinders
67 LPM (18 GPM)
20,684 kPa (206.8 bar)
(3000 psi)
2
Flip Wing Down Pressure Cylinders
22 LPM (6 GPM)
20,684 kPa (206.8 bar)
(3000 psi)
2
Wing Fold Valve Block
55 LPM (15 GPM)
20,684 kPa (206.8 bar)
(3000 psi)
3
Product Pump Drive Motor
61 LPM (16 GPM)
20,684 kPa (206.8 bar)
(3000 psi)

Fast A10 Specifications

General

Brand	Fast
Model	A10
Category	Farm Equipment
Language	English