Fastech Ezi-Step Plus-R

- 10 5 -
105
Library for PC Program
FAS_PosTableReadROM
To read position table items b eing saved in ROM area
Syntax
int FAS_PosTableReadROM(
BYTE nPortNo,
BYTE iSlaveNo
);
Parameters
nPortNo
Port number of relevant drive.
iSlaveNo
Slave number of relevant drive.
Return Value
FMM_OK : Command has been successfully performed.
FMM_NOT_OPEN : The drive has not been connected yet .
FMM_INVALID_PORT_NUM : There is no nPort in the connected ports .
FMM_INVALID_SLAVE_NUM : There is no drive of iSlaveNo in the relevant port .
FMC_POSTABLE_ERROR : An error occurs while position table is being re ad.
Remarks
Example
See Also
FAS_PosTableWriteROM