Fastech Ezi-Step Plus-R

- 11 1 -
111
Library for PC Program
FAS_TriggerOutput_Status
To check if the trigger output is working or not.
Syntax
int FAS_TrggerOutput_Status(
BYTE nPortNo,
BYTE iSlaveNo,
BYTE* bTriggerStatus
);
Parameters
nPortNo
Port number of relevant drive.
iSlaveNo
Slave number of relevant drive.
bTriggerStatus
Current status of signal output .
Return Value
FMM_OK : Command has been normally performed.
FMM_NOT_OPEN : The drive has not been connected yet.
FMM_INVALID_PORT_NUM : There is no nPort in the connected ports.
FMM_INVALID_SLAVE_NUM : There is no drive of iSlaveNo in the relevant port.
Remarks
Example
See Also
FAS_ TriggerOutput_RunA