Fastech Ezi-Step Plus-R

- 94 -
94
Library for PC Program
FAS_AllMoveSingleAxisIncPos
To move all motors that connected in same port to the incremental coordinate value
Syntax
int FAS_AllMoveSingleAxisIncPos(
BYTE nPortNo,
long lIncPos,
DWORD lVelocity
);
Parameters
nPortNo
Port number of relevant drive.
lIncPos
Incremental coordinate of position to move
lVelocity
Velocity when the motor moves
Return Value
No response
Remarks
Example
Refer to ‘FAS_MoveSingleAxisAbsPos’ library.
See Also