Fastech Ezi-Step Plus-R

- 80 -
80
Library for PC Program
FAS_MoveOriginSingleAxis
To search the origin of system. For more information, refer to ‘User Manual_Text 9.3
Origin Return’.
Syntax
int FAS_MoveOriginSingleAxis (
BYTE nPortNo,
BYTE iSlaveNo
);
Parameters
nPortNo
Port number of relevant drive.
iSlaveNo
Slave number of relevant drive.
Return Value
FMM_OK : Command has been successfully performed.
FMM_NOT_OPEN : The drive has not been connected yet .
FMM_INVALID_PORT_NUM : There is no nPort in the connected ports .
FMM_INVALID_SLAVE_NUM : There is no drive of iSlaveNo in the relevant port .
Remarks
Example
Refer to ‘FAS_MoveSingleAxisAbsPos ’ library.
See Also