Fastech Ezi-Step Plus-R

- 61 -
61
Library for PC Program
FAS_IOAssignMapReadROM
To load the status of CN1 assignment I/O setting status and signal level in ROM area
Syntax
int FAS_PosTableReadROM(
BYTE nPortNo,
BYTE iSlaveNo
);
Parameters
nPortNo
Port number of relevant drive.
iSlaveNo
Slave number of relevant drive.
Return Value
FMM_OK : Command has been successfully performed.
FMM_NOT_OPEN : The drive has not been connected yet.
FMM_INVALID_PORT_NUM : There is no nPort in the connected ports.
FMM_INVALID_SLAVE_NUM : There is no drive of iSlaveNo in the relevant port.
Remarks
Example
See Also
FAS_ GetIOAssignMap