FMM_INVALID_SLAVE_NUM,
Slave number does not exist. Checking the ID value of the drive.
(This error cannot be occurred in GUI.)
FMC_DISCONNECTED = 5,
COM Port is disconnected during communication. Checking the communication cable
Or Power of the drive.
FMC_TIMEOUT_ERROR,
There is no response from the drive .
FMC_CRCFAILED_ERROR,
CRC value of communication packet from the drive is not correct . Checking the
Possibility of noise on communication cable.
FMC_RECVPACKET_ERROR,
To Next Page
Loading...
