Feasa 3-F - Command Summary (Capture & Get Data)

FEASA LED ANALYSER
FUNCTIONAL VERSION
Command Summary:
COMMAND DESCRIPTION
Capture Store LED Data - Auto Range
Capture# Store LED Data - Manual Range
CapturePWM Store PWM LED Data – Auto Range
Capture#PWM@@ Store PWM LED – Manual Range
Capturemulti Store LED Data – Specific Range, Specific Fiber
CaptureSequence Store LED Data – Sequence Mode
getRGBI## Get RGB, Saturation and Intensity for a LED
getHSI## Get Hue, Saturation and Intensity for a LED
getxy## Get the xy Chromaticity values
getxy i ## Get the xy Chromaticity and Intensity values
getCCT## Get Colour Temperature for LED
getWI## Get Wavelength & Intensity for LED
getW S I## Get Wavelength, Saturation & Intensity for LED
getUV## Get the u'v' Chromaticity values
getWAVELENGTH## Get Dominant Wavelength for LED
get CIEXYZ@@ Get the XYZ data for a LED
getINTENSITY## Get the Intensity for a LED
getsignallevel## Get the Intensity of the LED in % mode
getAbsint@@ Get the Absolute Intensity for a LED
get7SEG# Get the value of a 7segment display
getSTATUS Get the summary details of a Led Analyser
getHW Get the Hardware Version of the Analyser
getSERIAL Get the Serial Number of the Analyser
getVERSION Get the Firmware Revision of the Analyser
Back to Index
122