Feasa 3-F - Get Sequence Capture Time

FEASA LED ANALYSER
FUNCTIONAL VERSION
Sequence Capture Mode
GetSequenceCapture - Get Sequence Capture Time
Transmit Receive
getsequencecapture xx ms or xxx ms
Where:
## represents the capture time in milliseconds (01 – 99)
### represents the capture time in milliseconds (001 – 999)
To determine which Capture Time is set, use the command getsequencecapture It will
return a time in milliseconds.
getsequencecapture
005 ms (5 milliseconds)
Back to Index
98