FEASA LED ANALYSER
FUNCTIONAL VERSION
User Calibration Mode
getXOFFSET## - Return the x Chromaticity offset
Transmit Receive
getxoffset## ±0.xxx
Where:
## represents the Fiber Number and is a number in the range 01 – 20.
±0.xxx represents the x Chromaticity offset
Description
This command is used to return the x Chromaticity offset for the LED under the Fiber number
##. The value of this offset must be set by the setxoffset## command. The default value
is 0.000.
Example:
The PC transmits getxoffset01 to the LED Analyser to instruct it to send the stored x
Chromaticity offset for the LED positioned under Fiber No 1. The LED Analyser will return a
string ±0.xxx to the PC.
getxoffset01
+0.155
Back to Index
62
To Next Page
Loading...