Feasa 3-F - Get Sequence Wait Time

FEASA LED ANALYSER
FUNCTIONAL VERSION
Sequence Capture Mode
GetSequenceWait - Get Sequence Wait Time
Transmit Receive
getsequencewait xx ms or xxx ms
Where:
xx represents the wait time in milliseconds (00 – 99)
xxx represents the wait time in milliseconds (000 – 999)
To determine what Wait Time between Sequence Captures is set to, use the command
getsequencewait . It will return a time in milliseconds.
getsequencewait
005 ms (5 milliseconds)
Back to Index
99