42
Using the SSLoader+ Software
SS2000+ Series C
Federal Signal www.fedsig.com
Relay Outputs
Select Relay Outputs from Activation Codes to display the Relay Outputs group box. To
save, click Save.
NOTE: Relay Outputs functions do not work if the relays were configured for other tasks
on the General Configuration tab.
Field Description
Off Time Enter how many seconds the relay waits after the activation to close.
The range is 0-999.
On Time Enter how many seconds the relay stays close. The range is 0-999.
HotKey
Select HotKey from Activation Codes to display the Hot Key group box. To save, click
Save.
Field Description
Activate Commander
Hot Key #
Select the organization code from the list.
To Next Page
Loading...
Need help?
General
