TST Startup FU3E
FEIG ELECTRONIC GmbH Page 27 of 29 FU3E_Inbetriebnahme_7_GB.doc
Positioning system faults
F.762
Electronic limit switch
positions incorrect
• Upper limit switch Eo or intermediate limit switch E1 has
exceeded the valid limit range
• Controller not yet initialized
• Position values during calibration not correct or values are
no longer plausible
12.1 Internal system-related errors F.9xx
These are internal errors which cannot be eliminated by the user.
If such an error occurs, call customer service immediately.
To Next Page
Loading...
