Feig Electronic TST FUZ2-C User Manual

FUZ2 -A/-B/-C/-CX/-G/-L
Assembly instructions
TST
FEIG ELECTRONIC GmbH Page 90 of 96 TST_FUZ2-A-B-C-CX-G-L_Montageanleitung_EN_22.docx
No.
Description
I.700
In timer limit switch operating mode (typ. after power on) the door position is not available. Deadman speed is maintained until the actual position
becomes available again.
I.856
The internal safety edge is tripped because of an WiCab radio problem
The radio connection interrupts during door drive for a short time. Possible causes are:
• The Distance between mobile and stationary unit is larger than specified
• No perfect Orientation of stationary and mobile antenna
• The radio link is disturbed by external noise

Feig Electronic TST FUZ2-C Specifications

General

Brand	Feig Electronic
Model	TST FUZ2-C
Category	Controller
Language	English