To Next PageTo Next Page
Need help?Do you have a question about the Felder A 941 and is the answer not in the manual?
General| Max. planing width | 410 mm |
|---|---|
| Total table length | 1800 mm |
| Table height | 850 mm |
| Max. depth of cut | 5 mm |
| Cutterblock speed | 5000 rpm |
| Voltage | 400 V |
| Planer fence dimensions | 1150 x 150 mm |
| Feed speed | 8 m/min |
| Motor power | 4 kW (5.5 HP) |
| Planer fence tiltable | 90° - 45° |
Explains warning symbols used in the manual for safety.
Covers modifications, operator duties, and personnel requirements.
General safety rules and adherence to regulations for preventing injury.
Details mandatory protective clothing and gear for safe operation.
Identifies potential dangers inherent to the machine's operation.
Lists additional risks encountered during machine operation.
Specifies voltage, motor power, and connection requirements.
Covers safety break switches, motor protection, and main switch.
Safety guidelines for handling and transporting the machine.
Safety warnings and requirements for assembly and installation.
Covers earthing, voltage, circuit breakers, and cable specifications.
Safety warnings before performing any adjustments or maintenance.
Guidance on setting the thicknessing height using various control types.
Lists common errors, their causes, and recommended solutions.
Critical safety rules for operating the machine safely.
Guidelines for safe workpiece handling and personal safety.
Step-by-step guide to safely start the machine.
Procedure for safely shutting down the machine.
How to use the emergency stop button to halt the machine.
Instructions for mounting and using the power feeder.
Permitted and forbidden techniques for thickness planing.
Detailed steps for setting up and performing thickness planing.
Safety warnings before performing any maintenance work.
Table outlining maintenance tasks and their intervals.
Procedure to verify the functionality of safety break switches.
Safety warnings before attempting to diagnose or repair faults.
Immediate steps to take when a machine fault occurs.
A guide listing common machine faults, their causes, and repair steps.
Step-by-step guide for reversing or replacing system planer blades.
Procedure for reversing or changing Tersa automatic cutterblock knives.
Instructions for sharpening or replacing standard planer knives.
Essential safety guidelines for using and maintaining the Silent Power® cutterblock.
Detailed steps for changing carbide inserts in the cutterblock.
