Felder A 941 - Page 21

21
"
#
"
!
#
0,6 mm /
!
Planer-Thicknesser
A 941 / AD 941 / AD 951
Table extension „Alu“
Art. No. 01.2.140 (with “F” coupling)
Table extension „Cast iron“
Art. No. 01.1.001 (with “F” coupling)
Table extension coupler
Art. No. 430-150
Table extension with workpiece roller for the thicknesser
table
Art. No. 600-152
!Table extension „Alu“
"Table extension „Cast iron“
#Coupling system
5.8 Important accessories
Fig. 5-9: Table extensions with F-Coupling
Note:
For further accessories and dust extraction equipment see Accessory catalogue.
5.7 Workpiece roller/Under table rollers (optional)
Fig. 5-8: Workpiece roller/Under table rollers
Workpiece roller:
Workpiece roller thicknesser table on the infeed side
(only in combination with electrical height adjustment)
See assembly instructions
Adjustable under table rollers (optional):
Are used to machine wet or resinous woods (adjustable
to a max. of 0.5 mm with the lever).
!Workpiece roller
"Under table rollers
#Lever for under table rollers
Assembly