Festo CMMP Series Description

Festo P.BE-CMMP-FHPP-DN-SW-EN en 0708NH 3
Edition __________________________________________________ en 0708NH
Description ________________________________ P.BE-CMMP-FHPP-DN-SW-EN
Order no. ___________________________________________________ 557 350
(Festo AG & Co KG., D-73726 Esslingen, 2008)
Internet: http://www.festo.com
E-mail: service_international@festo.com
The copying, distribution and utilization of this document as well as the communication of
its contents to others without expressed authorization is prohibited. Offenders will be held
liable for compensation of damages. All rights reserved, in particular the right to carry out
patent, utility model or ornamental design registrations.

Festo CMMP Series Specifications

General

Control Mode	Position, Torque
Communication Interfaces	CANopen, EtherCAT, PROFINET, Ethernet/IP
Power Supply	24 V DC
Feedback System	Incremental encoder, Absolute encoder
Number of axes	1
Relative humidity	5% to 95% (non-condensing)
Operating temperature	0 °C ... +50 °C