Festo CMMP Series Description

4 Festo P.BE-CMMP-FHPP-DN-SW-EN en 0708NH
Index of revisions
Author:
Name of manual:
File name:
File saved at:
Consec. no.
Description
Index of revisions
Date of amendment
001
Produced
0708NH
18.04.2008
Trade names
DeviceNet™ is a registered trademark of the ODVA.

Festo CMMP Series Specifications

General

Control Mode	Position, Torque
Communication Interfaces	CANopen, EtherCAT, PROFINET, Ethernet/IP
Power Supply	24 V DC
Feedback System	Incremental encoder, Absolute encoder
Number of axes	1
Relative humidity	5% to 95% (non-condensing)
Operating temperature	0 °C ... +50 °C