© Festo Didactic GmbH & Co. KG 11
General
Trainees must only work on the station under the supervision of an instructor.
Observe the data in the data sheets for the individual components, in particular
all notes on safety!
Electrics
Electrical connections are to be wired up or disconnected only when power is
disconnected!
Use only low voltages of up to 24 V DC.
Pneumatics
Do not exceed the permissible pressure of 8 bar (800 kPa).
Do not switch on compressed until you have established and secured all tubing
connections.
Do not disconnect air lines under pressure.
Particular care is to be taken when switching on the compressed air. Cylinders
may advance or retract as soon as the compressed air is switched on.
Mechanics
Securely mount all components on the plate.
No manual intervention unless the machine is at rest.
To Next Page
Loading...
