1. Introduction
© Festo Didactic GmbH & Co. KG 9
operating authority upon conclusion of the contract at the latest. Warranty and
liability claims for persons or material damage are excluded if these can be traced
back to one or several of the following causes:
Use of the MPS not in accordance with its intended purpose
Incorrect assembly, commissioning, operation and maintenance of the MPS
Operation of the MPS using faulty safety equipment or incorrectly fitted or non
operational safety or protective devices
Non observance of notes in the manual regarding transport, storage, assembly,
commissioning, operation, maintenance and setting up of the MPS
Unlawful constructional modifications on the MPS
Inadequate monitoring of components subject to wear
Incorrectly carried out repairs
Catastrophies as a result of foreign bodies and vis major.
Festo Didactic herewith rules out any liability for damage or injury to trainees, the
training company and/or other third parties which may occur during the
use/operation of the system other than purely in a training situation, unless such
damage has been caused intentionally or due to gross negligence by Festo Didactic.
This system has been developed and produced exclusively for vocational and further
training in the field of automation and technology. The training authority and/or the
instructors is/are to ensure that trainees observe the safety precautions described
in the manual provided.
The use of the system for its intended purpose also includes:
following all advice in the manual and
carrying out inspection and maintenance work.
1.6
Warranty and liability
To Next Page
Loading...
