1. Summary of components
1−21
Festo P.BE−MPA−EN en 0910d
Pressure zone separation with isolating seals
The following channels can be separated with the isolating
seals (see also Tab.1/8):
Supply duct (1) only
Supply duct (1) and exhaust ducts (3) and (5)
Exhaust ducts (3) and (5) only
You can recognize whether your MPA−S valve terminal is
equipped with pressure zones, and if so how many eithe r by
the marking on the sub−ba s e (see Tab.1/7) or by the marking
on the seal (see Tab.1/8).
To Next Page
Loading...
