Festo MPA Series - Page 40

1. Summary of components
1−22
Festo P.BE−MPA−EN en 0910d
1
235
6
7
8
4
9
aJ
MPA−S valve terminal with ...
1 Additional identification of the seals/separating seals for the MPA−S valve terminal with exhaust
plates
2 Position of the marking for separating seals
... Flat plate silencer ... E xhaust plate
3 Without identification: Seal with open
channels (1), (3) and (5)
7 Separating seal, channels (3) and (5)
blocked (Ident. code R)
4 Separating seal, channels (1), (3) and (5)
blocked (Ident. code S)
8 Separating seal, channel (1) blocked
(Ident.code I)
5 Separating seal, channel (1) blocked
(Ident.code I)
9 Separating seal, channels (1), (3) and (5)
blocked (Ident. code S)
6 Separating seal, channels (3) and (5)
blocked (Ident. code R)
aJ Without marking Seal with
open channels (1), (3) and (5)
Tab.1/8: Marking of the seal variants for the sub−bases